Please follow the next steps

  1. 116e
    Apply phosphoric acid (e.g. K-ETCHANT GEL) to the pivot tooth and let it act for 5 seconds. Thereafter, rinse and dry.
  2. 115e
    Apply CLEARFIL™ CERAMIC PRIMER PLUS to the pivot using an application brush. There is no need to wait for the product to act. Dry the entire surface using a mild oil-free air flow.
  3. 102e
    Apply Tooth Primer to the element using an application brush and let it act for 20 seconds. Remove the excess Tooth Primer by means of a cotton wool pellet. Dry the surface using a mild oil-free air flow.
  4. 103e
    Apply the cement to the root canal. Attention: Start the next step within 60 seconds from applying the cement.
  5. 123e
    Place the pivot in the root canal. Move the pivot slightly up and down to prevent air bubbles from accessing the root canal. Distribute the excess cement across the stump base and pivot head.
  6. 124e
    Polymerise the entire restoration according to table 1. Follow the advice for chemical curing as provided in table 2. Attention: opaque colours will only cure chemically.
  7. 105e
    Apply stump build-up composite in keeping with the instructions provided by the manufacturer.
  8. 106e
    Table 1
  9. 107e
    Table 2

These procedures have been put together with the greatest care. The "standard procedure" shown above is only intended as a brief indication of the actual procedure to follow. This procedure is for general information purposes only and no rights may be derived from it. To find the detailed instructions for the correct use of the product, Kuraray Dental Benelux refers you to Kuraray Co. Ltd's instructions for use.